Shimano XT M8020 11 Speed Double Front Derailleur
Shimano XT M8020 11sp Front Mech
- Direct Mount, Black, Silver, Double
- Designed for MTB riding.
- Made from Alloy.
Lightweight front low clamp band mount Dyna-Sys11 11-speed double MTB derailleur for smooth gear changes.
Designed specifically with modern trail bikes in mind, Shimano XT side swing technology front derailleurs increases tyre clearance by 15mm, while new cable routing resulting in the lightest shifting action yet. Side pull cable routing. Reinforced light weight chain guide adds rigidity and improved response.
Wider pivot link increases torsional rigidity. Easy access angled adjustment screws and clamp bolt. Angled inner chain guide tail for increased tyre clearance.
Dyna-Sys11 11-speed design - for use with Dyna-Sys11 11-speed MTB drivetrains. Developed specifically for double chainsets and frames with band on frame design. Specifically developed for 68 and 73 mm bottom bracket shells with a 48.8 mm chain line.
66-69 degree chainstay to seat tube angle range. 34-38 tooth outer ring compatible... more details.
XT M8020 11sp Front Mech Specification
|Components Type||Front Mechs|
|Type||11 speed, Double Chainring, Front|
UK Postage would be £2.99. Spend £13.50 more @ Merlin Cycles to qualify for FREE shipping (or buy 3 more of these products?!).
Please note this P&P is an estimate, and is based on the following Merlin Cycles UK delivery charges:
Standard Delivery FREE for items over £20 and £2.99 for items under £20. Bulk Orders (Bikes, Frames & Wheels etc) £19.99. Full details on Merlin Cycles' P&P charges can be found here.
Please note - I regularly update these charges, but shipping policies do change - Please ensure they are correct before completing a purchase.
More of my front derailleur deals
My front mech deals are below
Or view all of my front derailleur deals.
These handy devices enable you to shift gear, as well as help to keep your chain on. Otherwise known as front derailleurs, they are designed to work with a specific number of chain rings (either double or triple) and speeds (from 7/8 speed all the way up to 11). You need to establish that your new front mech will both fit your frame, as well as be suitable for your current drivetrain. If in doubt, try to replace the older model with a similar derailleur - you won't need to replace front mechs as often as rear, in some cases they can last decades! The industry leaders in this department are Shimano, SRAM, and Campagnolo, although companies such as FSA also produce their range of derailleurs too.
Or view all of my bike component dealss.