Nukeproof Reactor 275 Alloy Full Suspension MTB Frame 2020
As far as I'm aware this Nukeproof deal is sold out.
At the heart of this Alloy Nukeproof Reactor 275 frame is a highly advanced and easily adjustable suspension platform.
- 2020 Nukeproof Alloy Full Suspension MTB Frame
- Fits 27.5" Disc Brake Wheels
- Was available in XL in Green.
- Designed for MTB riding.
- Weighs 3.66kg
2020 Nukeproof Reactor 275 FS MTB Frame
This system is engineered for aggressive trail riding and provides the utmost reliability and confidence-inspiring performance.
Custom Triple Butted Hydro-Formed Tube Set and Carbon Seat Stays With a custom triple butted hydro-formed tube set and carbon seat stays at its core, this Reactor frame is engineered to provide the best strength and stiffness at low weight in this category.
Fine-tuned for the best manoeuvrability, stability and control, this 27.5" alloy frame construction glides you across the roughest of terrains with trail-gobbling performance and confidence-inspiring reliability. Flip Chip Adjustable Suspension Geometry All models of the Reactor feature a " flip-chip", so that the bike geometry can be easily adjusted from " Trail" to " Rail" mode without having to custom tune your suspension setup. The Trail setting is best suited for pumping and carving your rhythm and style into the mountainside and still caters for rides who love the climb as much as the descent.
On the other hand, the Rail setting turns the Reactor into an adrenaline-fuelled gravity tamer. Dropping the bottom bracket height by 6mm and slackening the head angle by half a degree, these changes give this Reactor greater stability and control when the trail leans downhill towards vertical.
Technologies: Nukeproof 4-Bar Horst Linkage Suspension Design: Ensuring the bike can climb as well as it descends, Nukeproof focussed on fine-tuning their 4-Bar Horst linkage suspension set up to give higher levels of anti-squat performance when higher up the cassette in the climbing gears, but also to deliver greater trail-gobbling performance when you drop down the cassette and begin descending the mountain.
This means that the bike behaves itself on the climbs and grips with unprecedented traction and efficiency when making your way back towards sea-level. When you get it up to speed and drop a few gears to carry momentum, this bike turns into a trail hooligan and helps you carve the trail with style. The combination of low anti-squat and progressive suspension-rate give it the ultimate in small bump compliance (removes rough trail and root chatter) with good mid-stroke support for cornering/pumping and end stroke progression for aggressive riding.
With balanced anti-rise suspension performance, the Reactor provides some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure stability and traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.
ON SALE: BEGINNING OF NOVEMBER Features: Material: Hydroformed 6061 Triple-Butted Aluminium (Front Triangle and Chain Stays) / UD Woven Carbon Firbre Seat Stays.
Fork Travel: 150mm.
Axle to Crown: 545mm.
Fork Offset: 46mm.
Shock Travel: 140mm.
Wheels Size: 27.5" Max Tyre Size: 2.6" Shock Size: 210x55mm.
Shock Hardware F: 25x8mm.
Shock Hardware R: 30x8mm.
Headtube: 44-56mm Tapered Semi-Integrated.
Headset: ZS44-28.6 - T2 / ZS56/40 - B8Bearings Required: 2x NP-5 (6902 2RS), 4x NP-7 (6800 2RS), 4x NP-106 (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mmBB: Threaded 73mm BSARear Hub: Boost 148x12mm.
Rear Axle: Sram Maxle Stealth M12x1.75 180mm.
Chain Guide: ISCG05Brake Mount: 180mm Direct Post.
Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS Frame: Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, custom tuned rear shock, internal dropper seatpost cable routing, Enduro bearings, threaded bottom bracket, boost 148mm rear axle spacing, 3D contoured frame protection - designed for 150mm fork travel.
Shock: RockShox Super Deluxe Ultimate RCT, Custom ML 380 tune, 210x55mm, Bearing End (Comes with 1x bottomless token fitted so you have them if needed.). Custom tuned rear shock configuration. Internal cable routing.
Enduro Bearings. Threaded 73mm BB. Boost 148mm rear axle spacing.
3D contoured frame protection. 2 position adjustable Flip chip system.
Weight: 3.66kgs (Including shock).
Model Year: 2020.
Frame: Alloy, 140mm Travel, custom triple butted hydro-formed front triangle and chain stays, UD woven carbon fibre Seat stays, custom tuned rear shock, internal dropper seatpost cable routing, Enduro bearings, boost 148mm, 3D contoured frame protection.
Fork: 150mm Travel.
Bottle Cage Mounts: Single.
Wheel Size: 27.5" (650b).
Brake Callipers: Post Mount.
Frame Weight: 3.66kg.
Where to buy the Nukeproof Reactor 275 Alloy Full Suspension MTB Frame 2020?
As far as I'm aware, this Nukeproof Reactor 275 FS MTB Frame deal has expired.
You can see if it is back on sale
or if I have any other suitable Frames.
This Nukeproof deal was originally found at Wiggle, costing £1199.99 (down from £1899.99) and was last updated on 10th May 2021.
More of my MTB frame deals
My mountain bike frame deals are below
Or view all of my Bike Frames deals.
The frame is the heart of the bike, a lightweight chassis that the rest of the components are bolted to. Each frame I list will be clearly marked as to it's intended purpose - whether road, MTB, cyclocross or other form of riding. Similarly, I try to include as much information as I can regarding the materials used, such as carbon, alloy or steel, as well as the sizes available and full specification.
Or view all of my cycling components.